Quartz Tube Submersible Water UV Sterilizer for Tank Water Disinfection

Quartz Tube Submersible UV Water Sterilizer for Tank Water Disinfection
 Advantages:
 
High—efficiency sterilization
Sterilization of cell viruses with UV C is generally within one second. In comparison, the traditional
UV and Cl and Ozone Methods takes 20 min to one hour to match the effect of UVC.
 
No secondary pollution
As the UV-c Technology can be controlled within the scope of killing the bacteria or viruses only
and it is unnecessary to add any chemicals, it Operation complexity Simple to middle grade Simple
to middle grade will not cause the secondary pollution to the water body and the surround environment. Meanwhile, it will not change any component of the water.
 
It makes continuous mass sterilization possible. 
The modern UV-C disinfection equipment can work 24 hours a day and 365 days a year. Except
for the general maintenance within the fixed time, the optimum operation condition is the 24-hour
continuous operation.
 
Operation and maintenance is simple and easy and of low cost.
With the improvement of UV-C core technology, the UV-C disinfection technology is not only the
means of the highest disinfection rate of all the disinfection methods but also the simplest and
easiest in operation and maintenance and of the lowest cost, reaching RMB 0.004 Yuan/T of water.
Therefore, cost performance ratio is the highest of all the disinfection technologies. It has the high
efficiency advantage superior to other sterilization technologies but also is the lowest in cost and
expenses for operation and maintenance.
 
Safe and Reliable Operation
In terms of the traditional sterilization technology, like the methods of using the chloride or ozone,
the disinfectant itself is highly toxic, flammable and explosive. Application of these substances
causes latent threat to the site operators, the surrounding environment and the nearby residents.
The modern ultraviolet disinfection system, however, does not bear such potential risks.
 
Introduction
The integrated or ballast external profile includes: quartz UV bactericidal lamps, quartz tubes, 
sealing accessories, four hole plug. rubber cap, protection and indicator lights and external 
electronic ballast. The bactericidal lamps can dive into the water and realize 360 degrees 
sterilization, achieving sterilization affect three times as much as that of water surface bacterial lamps. 
It is designed on the principle that the uv of uv-c (253.7nm wavelength) can damage and kill the 
microorganism DNA. It is equipped with the 
high-purity quartz tubes, high performance quartz low voltage mercury UV bactericidal lamps 
and ballast especially for UV bactericidal lamps.
 
 
Applications:
The immersion UV sterilizer can effectively sterilize and purify water tanks and pools of various
 water 
bodies and liquid, effectively prevent the secondary pollution and maintain the cleanness of water, 
applicable
 for water supplied by different qualities, and industries demanding water supplied by time and section 
as electronics, pharmacy, food and cosmetics.
 
Specifications:

 
Characteristics of the immersion ultraviolet sterilizer: 
1. High water-proof performance, compacted design and convenient for use:
2. Equipped with the high light transmittance quartz socket tubes:
3. The UV bacterial lamp is of high radiation efficiency and stable output power:
4. Equipped with the long service life low-voltage mercury ultraviolet lamps which can serve at 
least 9000 
hours and guarantee the stable
 UV-C output within the service life:
5. Equipped with the ballasts specially designed for the ultraviolet sterilizer (replaceable). When the
 lamp does not work, alarm signal will be seen.
 

 
 
 
FAQ:
 
Q. Are UV sterilizers a good replacement for biological and mechanical filtration?
A. NO. UV sterilizers are not a replacement for good biological and mechanical filtration, regular
water changes, or proper control of the nitrogen cycle.